| Appliance cords are the cords used from appliance to the mains supply socket or interface cords between a gadget & the ancillary gadget. |
The power supply cords are manufactured by using ISI marked cables & integrally moulding these with 3 pin plug. 3 pin plug has three basis components & moulded in 2 stages. Brass pairs as per IS:1293 are soldered or along with cables, moulded with polypropylene, which provides greater di-electric strength, thereafter on first mould a final layer of coloured PVC matching to the wire is provided. |
| |
The cables used in these products can be suitable to various temprature
a) -15°C to +70°C
b) -40°C to +85°C
c) -20°C to +105°C |
| |
Mains supply cords are generally manufactured in the following versions. |
| |
| Item |
Current Capacity |
Configuration |
Cable Used |
Standard
Length |
| Mains Cord |
3 Amp. |
2 Pin |
14/0.15 mm (0.25 mm2)
2 Core Flat cable |
2 Mtrs. |
| - |
3 Amp. |
2 Pin |
16/0.2 mm (0.5 mm2)
2 Core, Flat Calble |
2 Mtrs. |
| - |
6 Amps. |
3 Pin |
16/0.2 mm (0.5 mm2)
3 Core, Round Cable |
2 Mtrs. |
| - |
10 Amps. |
3 Pin |
32/0.2 mm (1.0 mm2)
3 Core, Round Cable |
2 Mtrs. |
| - |
16 Amps |
3 Pin |
48/0.2mm (1.5 mm2)
3 Core, Round Cable |
2 Mtrs. |
|
| |
| Applicable Standard: IS 1293 |
| Products as per UL and CE standard can be produced. |
| |
Note
: While Placing your Inquiry/Order Please specify
a). Type of conductor = ABC
b). Cable size (mm.sq.)
c). Temperature range.
d). Specific colors of insulation and sheath.
e). Length of power cord.
f). Total requirment. |
| |
